emptyaudio

emptyaudio
Added: 27. October 2004

emptyaudio = altmp3/

Values
[relative path]

Description
Defines the alternative path for mp3 audiotracks if audioplayer encounters a folder containing no tracks. This setting only comes into effect if feature audiopath is set to 'groupfolder' or 'imagefolder' and the current groupfolder or imagefolder has no mp3 tracks. Useful for defining a track to play on imagevue startup, before any imagefolder or groupfolder is active, or if you don't wish to upload tracks into every single folder.

If audioplayer encounters a folder containing no audiotracks,
it will load tracks from the emptyaudio path

In these examples, audio will only be enabled if you have a sufficient connection speed.
See how tracks are played from current imagefolder or groupfolder, and if a folder is empty, it loads track from the emptyaudio path.
www.imagevuex.com/imagevue/?emptyaudio=mp3/audiopath=imagefolder&audio=24&contentfolder=content3/
www.imagevuex.com/imagevue/?emptyaudio=mp32/audiopath=imagefolder&audio=24&contentfolder=content3/

www.imagevuex.com/imagevue/?emptyaudio=mp3/audiopath=groupfolder&audio=24&contentfolder=content3/
www.imagevuex.com/imagevue/?emptyaudio=mp32/audiopath=groupfolder&audio=24&contentfolder=content3/

 

As mentioned above, this setting may only have any effect if audiopath feature is set to 'groupfolder' or 'imagefolder'. Please read the guidelines for setting up your audioplayer here.